Allflex AFX-100 Manual de usuario descargar pdf (Pagina 18)

Discharged battery pack - As the battery pack discharges, the power

available to activate the field becomes weaker and this reduced field results

in a reduced reading range.

ID Code Memory

The Stick Reader has an internal non-volatile memory that can store 3099

ID codes. Non-volatile memory means that the data in memory will not be

lost even if the battery goes flat. Non-volatile memory is only cleared by

sending a specific command to the reader. This is done from software like

NLIS Link (Australia) or HyperTerminal etc.

ID codes are stored automatically when they are read. A transponder ID

code will not be stored several times if the same tag is read successively

several times, but if the reader is configured by the user to have the

Duplicate Search function is set to Last Tag, it will be store the number

several times in memory if other tags are read in between. When more than

3099 ID codes are read, the new ID codes overwrite the oldest ID codes in

memory.

A Bluetooth symbol will appear next to the counter on the top left

hand-side of the stick reader display indicating it is connected. Data

should now transfer from the wand to the scale head when you scan

a tag.

Note: the Bluetooth settings are saved in the WAND not the Bluetooth

endcap. For example, if you configure a wand to talk to a specific

Bluetooth receiver adapter, you can swap the Bluetooth endcap on the

reader and the system will continue to work as expected. If you swap the

wand however, the connection will not work, unless you program the new

wand to connect to the Bluetooth adapter attached to the scale head.

The settings are stored in the reader memory. The settings are NOT applied

to the CM301 Bluetooth module until the module is fitted to the reader and

it is powered up. At this point the screen will say “Configuring Bluetooth

Module”

Note: Because you have set the TIME ON setting to ALWAYS ON, the

only way to power the reader down is to unscrew the endcap and allow the

battery to momentarily detach.

1 2 ... 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Allflex AFX-100 Manual de usuario Pagina 18