Allflex AFX-100 Manual de usuario descargar pdf (Pagina 23)

Rev Australasia V2.3 12/04

23 23

Table 4 - Frequently Used Command Language Characters

Command Application

P Reader’s current settings are sent in command

language format

Bnnnnnn Configures ID code serial data format

Snn Sets serial data communications parameters

Inn Sets miscellaneous options

W00 Sets serial bus mode address

? or H Retrieves list of valid Command Language characters

Note - In Table 4, commands followed with “n” (hexadecimal characters) require the user to

press the PC’s <Enter> key after typing in all command characters. Single letter commands

do not require <Enter> to be pressed, except as noted in Table 5.

Command Language Examples:

Retrieve Current Configuration Settings:

User: P Comment

Reader: *Allflex Panel Reader Product Identity

*HW V1.01 Hardware Version Number

*SW V1.05 Software Version Number

*PR V2.24 Protocol Version Number

*B-840239 Serial Data Format Setting

*S-0C00 RS232/RS422 Settings

*I-01 Miscellaneous Settings

*W-00 Serial Bus Address

Example - Change Communications Bit Rate to 1200 BPS:

User: S0900<CR><LF> (<CR><LF> same as ‘Enter’)

Reader: *S-0900<CR><LF> Command Confirmed

Example - Change ID Code Transmit Format to Hexadecimal:

User: B850239<CR><LF> (<CR><LF> same as ‘Enter’)

Reader: *B-850239 Command Confirmed

Example - Start Read Cycle (Requested read mode):

User: R (<CR><LF> not required)

Reader LA_982_000000678234<CR><LF> (if tag found)

For a complete description of all commands and configuration option variables, please refer to

the Panel Reader Serial Command Language Manual which is attached as Appendix 1.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Sin comentarios

Allflex AFX-100 Manual de usuario Pagina 23