Allflex AFX-100 Manual de usuario descargar pdf (Pagina 37)

Rev Australasia V2.3 12/04

37 37

Testing If A Battery Is Charged And Working.

As mentioned a Multi-Meter can also measure voltage. If the reader is performing below

standard you can check the battery voltage by following these steps. Insert the black test

lead into the socket on the meter called Com. Insert the Red test lead into the socket that has

the V shown. On the selector switch, select DC Volts and the 20 volts scale. This may be

shown as V== (as opposed to AC volts which might be shown V~)

Hold the black test lead against

the negative (-) terminal on the

battery and the red test lead

against the positive terminal (+)

on the battery. If the meter shown

less that 10 volts, you should

consider recharging or swapping

the battery.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 52 53

Sin comentarios

Allflex AFX-100 Manual de usuario Pagina 37